Slicer Urschel GK
The Urschel Model GK slicer allows you to cut ripe, soft fruits and brittle root vegetables in a variety of ways. These include classic, even cubes, stripes, posts and straight and wavy patches, and even three-dimensional shapes with four corrugated and two flat surfaces. The device is especially recommended for slicing wavy potato fries.
Due to direct contact with the food product, the equipment is equipped with high-quality parts made of stainless steel. The cut-out operates smoothly, does not stutter, offering an uninterrupted cycle of work. Urschel’s experienced specialists have made sure that the device is easy not only to use, but also to clean and maintain.
Equally importantly, buyers of this cutting-cuber receive a wide range of interchangeable cutting parts. Thanks to this, it is possible to achieve gentle, clean cuts in a significant range of sizes. In addition, the machine can be equipped with any cutting size: 3/8″, 7/16″, 1/2″, 5/8″, 7/8″. Please note that the maximum sizes of the input product should not exceed 140 mm (5-1/2) in any direction. This is essential for the device to work properly and to guarantee satisfactory quality.
How does the Urschel Model GK work?
The vegetable to be cut is placed in the impement’s hopper. There it is moved and moves towards the slicer blade. It then passes through the adjustable slots, where – if the product is to be cut into strips – it encounters a transverse blade, then – if the goal is to get the cube – on the longitudinal blade. After all, the vegetable after processing goes into a container or conveyor belt further to the production line or for packaging. The whole procedure is fast and very efficient.
It is also worth mentioning the dimensions and power of the machine. Its width is 1167 mm. the length is 1873 mm and the height is 1251 mm. The weight of the device is 350 kilograms and the power is 1.5 kilowatts. This information is necessary to plan your purchase accordingly, m.in. determine the appropriate place in the plant, where you will be able to set up and connect the cube-cube.
|Type||dicer, cube slicer|